When the hot water system of home leaks, it becomes very difficult to repair. The reason is obvious. Leaking hot water system requires complete replacement and repairs to all the components. So, when it begins to leak from its water heater, you must repair it as soon as possible, before serious damages are caused to your expensive appliances and fittings.
But, unfortunately, repairing a hot water system is not an easy task to carry out on your own. It is advisable to call up a professional plumber who will do the job properly and safely. There is much hot water system leaking from the top-down issues that can be avoided by following some simple tips.
Before beginning fixing any hot water system leak, it is very important to find out the exact cause of the leak. If you find that the hot water system leak comes from any crack or leak inside the system then the leak needs immediate attention. A hot water system is very delicate and can even break down within minutes if proper attention is not paid while doing the repair work. There are many reasons for leaks including improper construction, improper installation, and clogged water pipes. To avoid unnecessary expenses in the future, make sure to take up a course in plumbing while you are at college. After completing the plumbing course, make sure to get a certification in plumbing to avoid unnecessary expenses in the future.
Causes of Leaks
The hot water system leak which is caused by a clogged drain can be easily removed with the help of a standard household plunger. But if the system is leaking from a crack in the floor or a crack in the wall then it is time to call in the professionals. Some hot water pipes come with a special tool called a hot water snake. This tool has a flexible spring that helps to wiggle the pipe inside the drain to break the clog. However, this tool is dangerous and must only be used by trained plumbers.
One of the most common hot water system leaking from the floor is caused by a loose floorboard. It is very important to always check for any loose floorboards in your home to avoid leaks. Loose floorboards also allow moisture and water to seep through and build up behind them. Even if the hot water system or pipe is not causing a leak, inspecting for loose floorboards at least once a year is advisable.
Another hot water system leaking from the floor is caused by cracks in the foundation. Cracks in the foundation need to be repaired immediately. If left unnoticed, they can expand and cause further damage to the structure of your home. To determine whether there is a possible crack in the foundation, a foundation contractor can check for signs of water damage, such as puddles on the floor or walls. If any of these are found, then the foundation needs to be repaired immediately.
Hot Water Tank
If hot water is leaking from a hot water tank, one of the first places to check is the pipes. If these pipes are not properly connected to the hot water system then leaks may occur. To properly connect the pipes, the hot water tank needs to be vented to a low point, usually above the ground. Leaks are more likely to occur in the hot water tank than anywhere else in the house, as the hot water is often siphoned directly into the hot water system where it travels through a series of pipes until it reaches the valve where it is released into the home.
If you find that you have a hot water system leaking, then you will first need to turn off all electricity to the house. Once this is done, you should remove the hot water system from the area. You will also need to open all of the plumbing doors and windows in the room where the leak is. Once you have located the source of the leak, you should use a wrench and tighten all the loose pipe connections. After the water is re-routed and the area is once again heated, you should make sure to follow any instructions provided by the manufacturer of your hot water system.